OVERVIEW

The Yealink T33G is a cost effective option for an entry-level business phone. It provides distraction free communications with excellent sound quality, free of extraneous noises. A 2.4 inch color display provides high-resolution graphics and a colorful experience.

SETUP

Factory Reset

If you're bringing your own phone to Intulse, a factory reset will clear out any settings from your previous provider. A factory reset is also helpful in situations where any other troubleshooting steps haven't resolved an issue with your phone. This will restore your phone's settings to the factory defaults and allow you to start from a clean slate.

To perform a factory reset, press and hold the center navigation key for 5-10 seconds until you see a confirmation message. Press the OK softkey and the reset will begin.

Connecting to Internet

Use an ethernet cable to connect the phone to your network (router, firewall).

PLACING A CALL

To place an outgoing call, choose one of the following options:

1. Type a number on the keypad, then either press the Call softkey or pick up the receiver.
2. Press the speaker key or pick up the receiver, then type a number on the keypad.
3. Press a line key assigned to an extension or speed dial and the call will immediately be dialed.

Placing Multiple Calls

When you are on a call, you can hold your current call and place a new one.

1. Press the Hold softkey to place the original call on hold.
2. Press the New Call softkey.
3. Enter the desired number.
4. Press the Call softkey.
5. When that call has ended, press the Resume softkey to return to the original call.

ANSWERING A CALL

When you receive an incoming call, the phone will ring and the screen will display the details related to the incoming call.

To answer the incoming call, do one of the following:

1. Pick up the handset.
2. Press the Answer softkey.
3. Press the speaker key.
4. Press the headset key on your phone or headset. This will only work if your headset is connected to your phone, not your computer.

Answering a Second Incoming Call

If Call Waiting is enabled on your phone AND your Intulse app, you can answer an incoming call even if you are currently on an active call. A call waiting tone will alert you of the new call and the incoming caller ID details will be displayed on your phone.

1. For the active call, you will have the options to End Call, Transfer, or Hold.
2. If you choose to transfer that caller or end the call, you will see options to Answer, Forward, Silence, or Reject the incoming call.
3. If you put them on hold you will see options to Answer, Reject, or End the incoming call.
4. If both calls are on hold, use the Up or Down navigation keys to move between them.
5. If you put the first caller on hold and answer the incoming call, when that call is ended you will see the original caller waiting on hold.
6. While on a call, you have the following options: Transfer, Resume, New Call, End Call, or Park.

HOLDING & RESUMING CALLS

You can place an active call on hold and resume the call when you are ready. When you place a call on hold, the held party will hear the music or recording selected by your system administrator.

Holding a Call

Placing an active call on hold is simple.

Press the Hold softkey during a call.

• The phone ignores the engaged audio device (handset or headset) and plays a beep in the Speakerphone (hands-free) mode by default. A pause symbol will appear on the screen and the phone will beep softly every 30 seconds to remind you that you still have a call on hold.

Resuming a Held Call

You can easily view and resume any calls place on hold.

1. Press the Resume softkey to pick up a call that has been placed on hold.
2. If multiple calls are placed on hold, use the up and down navigation keys to locate the call you would like to resume.

TRANSFERRING A CALL

During a call, you can transfer the call to another extension using one of the following methods:

1. Blind Transfer: Transfer a call directly to the new extension without any interaction.
2. Semi-Attended Transfer: This places the caller on hold and allows you to hear a ringback tone before transferring the call. If the user at that extension isn't available, you can retrieve the caller from hold.
3. Attended Transfer: This puts the caller on hold, allowing you to communicate with the intended recipient before the call is transferred.

Performing a BLIND Transfer

A blind transfer sends the caller to another extension without any interaction between the person transferring the call and the extension receiving the transfer.

1. Press the Transfer key during an active call.
2. Choose an extension or speed dial button, or type a phone number using the keypad and press the B Transfer softkey.
3. The call will be immediately transferred to the recipient.

Performing a SEMI-ATTENDED or ATTENDED Transfer

A semi-attended transfer places the caller on hold and allows you to hear a ringback tone before transferring the call. If the user at that extension isn't available, you can retrieve the caller from hold. An attended transfer puts the caller on hold so you can communicate with the intended recipient prior to the call being transferred.

1. Press the Transfer key while on an active call.
2. Choose an extension or speed dial line key, or type a phone number using the keypad.
3. Press the Call softkey. If you do not push any buttons, the transfer will begin automatically.
4. For a SEMI-ATTENDED transfer, press the Transfer key as soon as you hear the ringback tone.
   • This option will display your extension number on the intended recipient's caller ID until the call is transferred.
5. For an ATTENDED transfer, wait for the intended recipient to answer. The caller has been placed on hold, allowing you to communicate with the intended recipient. When you are ready to transfer the call, press the Transfer key and the transfer will be complete.

CALL PARKING

Call parking makes the process of moving calls to different extensions within your organization much easier. Calls are placed on hold by assigning them to a "parking space". Any user can retrieve a call from the parking lot by pressing the corresponding line key on any phone connected to your system.

For example, let's suppose that John answers many incoming calls during the day. John may need to send some of those calls to his manager, James. John can park a call in a space and call or message James to let him know that a caller is holding for him in Park 71. James can answer that call from any phone connected to their Intulse system. If James is unable to answer the call, John or anyone else in their organization can retrieve it. If no one picks it up, the call will eventually ring back to the person who parked it.

Parking a Call

Parking a call in a parking lot is simple and can be accomplished in one of the following ways.

1. While on an active call, press one of your programmed line keys which corresponds to a parking space.
2. If you need to park a call but don't have line keys assigned to parking spaces, simply perform a blind transfer to an available parking space number.
   • While on the active call, press Transfer.
   • Enter the parking spot number, usually 71 through 78.
   • Press the B Transfer softkey.

Retrieving a Parked Call

Parked calls can easily be retrieved from any phone connected to your Intulse phone system in one of the following ways.

1. Press the line key corresponding to the parking space which holds the call you wish to retrieve.
2. If you need to retrieve a call from a parking space for which you do not have an assigned button, simply dial the number for that parking space. The call is now active.
   • For example, if you wish to retrieve a call from parking space 72, simply dial 72 and press the call softkey. The call immediately becomes active on your device.

MULTIWAY/CONFERENCE CALLING

There are a few different ways to accomplish multiway calling. We will cover how to merge a few calls together here, but Intulse offers an Audio Bridge solution, which is what we recommend for more than 3 callers.

Multiway Calling, or creating a phone call between 3 callers, can be accomplished by following these steps:

1. Place a call to the first party.
2. When the first party answers, select Conference to place a new call. The first caller is placed on hold.
3. Place a call to the second party.
4. When the second party answers the call, select Conference again to merge the two callers into one multiway call.

Merging Two Active Calls into a Conference

You can also invite a held call into a conference call with an active call. Let's assume you have two calls on your phone that you want to merge into one conference call.

1. Select the first caller so one of your calls is active.
2. While on that active call, select Conference.
3. Now from the list of recent calls, use the arrow keys to select the call that is being held.
4. Press the Call softkey.
5. Your calls are now merged into one conference call.

Splitting a Conference Call

Calls that have been merged into one conference call can also be split back into individual calls.

1. While on your conference call, press the Split softkey. You may need to use the rightmost softkey to navigate to more options to locate the split option.
2. Calls are separated and placed on hold.
3. Use the up and down arrows to navigate to the call you would like to pick up first and press the Resume softkey.

For more information please see the Conference Calling Guide.

ACCESSING THE VOICEMAIL SYSTEM

The following will cover how to access the voicemail system from your phone. Intulse has a complete guide on how to use the voicemail system. For more information please see the Voicemail User Guide.

Accessing your Personal Voicemail

Accessing the voicemail for your extension is simple.

1. Press the voicemail key ().
2. Enter your Voicemail Pin and, optionally, press the pound (#) sign.
3. The default pin for any voicemail box is the extension number. If you have not reset your pin, you will be prompted to do so the first time you check it. The pin for your voicemail can be found on the voicemail settings tab in the Intulse App.

Accessing Another User’s (Shared) Voicemail

Your phone may be configured so one of your programmable line keys is monitoring another voicemail box. It will turn red if that mailbox has new messages.

1. Press the programmed line key.
   • If you don't have a programmed line key, you can press the asterisk ( * ) button and then dial the mailbox number. Once you hear the message begin, press the asterisk again and you will be prompted to enter the pin for that mailbox.
2. Enter your Voicemail Pin for this mailbox (if you have one) and, optionally, press the pound (#) sign.
   • The default pin for any voicemail box is the mailbox number.
   • Shared mailboxes may not require a pin in some cases.